Showing 281–320 of 506 results

Fuel Rail Nissan 200 4cyl SR20DET sunny GTI-R (NUKE 100-06-203)

38.49
Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.

Fuel Rail Toyota 1JZ 6cyl Bosch Injectors (NUKE 100-05-203)

185.89
Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.

Fuel Rail Toyota Supra MK4 6cyl Bosch Injectors (NUKE 100-05-201)

185.89
Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.

Genuine high flow Walbro intank fuel pump with intallation kit (pre filter + cable with connector). Flow capacity 416 l/h, output for 9.5 mm hose. Compatible with gasoline, E85 and RE85.

172.69
Fuel: GAS & E85 Horsepower: 750 at 60PSI, naturally aspirated applications Fittings In (mm):- 11 Fittings Out (mm):- 9 Voltage

Genuine high flow Walbro intank fuel pump with intallation kit (pre filter + cable with connector). Flow capacity 416 l/h, output for 9.5 mm hose. Compatible with gasoline, E85 and RE85.

164.99
Fuel: GAS & E85 Horsepower: 750 at 60PSI, naturally aspirated applications Fittings In (mm):- 11 Fittings Out (mm):- 9 Voltage

GM type air temp sensor, 3/8″-18 NPTF, Delphi 25036751

20.45
Genuine GM air temp sensor. Compatible with MegaSquirt.

High flow Bosch fuel filter (M16 + M16) (Bosch 0450905907)

46.19
If you remove orginal fittings then filter will have female M14 x 1.5 threads. Diameter [mm] 75, height [mm] 164,

High power AEM fuel pump 400 l/h@ 3 bar, M18X1.5/M12X1.5

208.99
Designed for high output naturally aspirated and forced induction EFI vehicles Popular “044 Style” physical configuration with metric fittings for

HV connector SET for coils with 4 mm pin, 1 kOhm (for IC1 cable)

6.59
For coils 0221503407, 0221503417 and VW distributor caps etc.

IGNITION COIL 6 Cyl

164.99
Connector set (primary): 1928402587-SET-2. High voltage coupling type: Saw Tooth 4 mm (for 18 mm boot). (0010020015-SET or 0356250034). Primary

Ignition coil with build in power stage (Bosch 0221604010)

50.83
Pin 1 = ECU Ignition signal, Pin 2 = ECU Gnd, Pin 3 = Engine Gnd , Pin 4 =

Ignition connector (SAE) for coils and plugs, 0 kOhm, wood screw

7.69
High voltage connector for 034 coils and for spark plug.Black silicone rubber, No resistor, wood screw fitting to ignition cable,